Brads / Sprigs / Beauty Brads

Black Finish Brads, Cement Coat Brads, Semi Brads and Plain Brads

The W.H. Bagshaw Company has been producing beauty brads since the late 1800’s. The brads or sprigs as they are sometimes called are heat treated and finished in either a BLACK  FINISH, CEMENT COAT, SEMI or PLAIN. Brads, Sprigs and/or Beauty Brads are used for hardwood floor replacement and molding applications. Always use caution when working with Brads. Observe OSHA safety guidelines and wear safety glasses.

Standard sizes and finishes as follows:

BRD.036X.875X.0625
Hardened, Headless Brads – .036+/-.001 x .875 +/-.010, Taper .0625

bradsBRD.036X.875X.0625-CC
Hardened, Headless Brads – .036+/-.001 x .875 +/-.010, Taper .0625 – CEMENT COATED

BRD.036X.875X.0625-SEMIF
Hardened, Headless Brads – .036+/-.001 x .875 +/-.010, Taper .0625 – SEMI-FINISHED

BRD.058X.625X.062-BF
Hardened, Headless Brads- .058 +/-.001 X.625 +/-.010 X Taper .062 – BLACK FINISH

BRD.058X.875X.062-BF
Hardened Headless Brads – .058 +/-.001 x .875 +/-.010, Taper .0625 – BLACK FINISH

BRD.068X.750X.062-BF
Hardened, Headless Brads- .068 +/-.001 x .750+/-.010, Taper .093 (3/32) – BLACK FINISH

BRD.068X.750X.062-CC
Hardened, Headless Brads – .068 x .750, Taper .062 – CEMENT COATED

BRD.068X.875X.093-BF
Hardened, Headless Brads- – .068 +/-.001 X.875 +/-.010 X Taper .062 – BLACK FINISH

BRD.068X.875X.093-CC
Hardened, Headless Brads- .068 +/-.001 x .875 (7/8)+/-.010, Taper .093 (3/32) – CEMENT COATED

BRD.068X1.25X.093-BF
Hardened, Headless Brads – .068 +/-.001 x 1.25+/-.010, Taper .093 (3/32) – BLACK FINISH

BRD.068X1.25X.093-CC
Hardened, Headless Brads – .068 +/-.001 x 1.25+/-.010, Taper .093 (3/32) – CEMENT COATED

BRD.068X1X.093-BF
Hardened, Headless Brads – .068 +/-.001 x 1+/-.010, Taper .093 (3/32) – BLACK FINISH

BRD.068X1X.093-CC
Hardened, Headless Brads – .068 +/-.001 x 1+/-.010, Taper .093 (3/32) – CEMENT COATED


CAN WE MAKE YOUR PARTS?

You are probably wondering if W.H. Bagshaw can make your part. The part or print that is on your desk right now! The answer is probably yes, but here is a bit more detail. We can produce from .028" to 1.25'' in diameter. Take a look at our parts library for some great examples of parts we can manufacture for you.

WH Bagshaw pins

FacebookLinkedInTwitterYouTube